Tactical Torch Scope Mount Base/Picatinny Weaver Rail Adapter Mount/Scope Rings

Description

1) 5-Slot Ad
apter Detach Riser Scope Mount with Rail:
20mm Rail 5 Groove Extension Track.
It Can be Attached to a Mounting Base of 20mm Rail Width.
You Can Installation about 15mm Base Increase.
Solid all the Metal,a Sense of Security.
With a Hex wrench, It Can be Easily Adjusted.
-
Package:
1x Mount
,
1x Hex wrench
2)
1''/25.4mm Scope Mounting Ring Holder for UF-T20/1508/1405 LED Flashlight Torch
Size(mm): full-size: 60(L)X40(W)X20(D)
Weight(g): 85/95
Ring Diameter: 25.4mm
Can be used on smaller scopes/torches with spacer.
This Mount is for Mounting Flashlights and Laser Sights with a One Inch Diameter Directly on to the Barrel of device.
The Mount Can be Separated Into Two Separate Parts. The Weaver Type Ring Mount Can be Used on Any Picatinny Rail Base.
The Ring is 1 inch and is Held Together by Four Screws. The Mount has a High Quality Matte Black Finish.
The
Ring Mount Can be Removed from the Base and Any Other Weaver Type Mount Can be Attached to the Base.
-
Package:
1x Mount
3) 30mm/25.4mm Picatinny Rail Mount:
Material: Aluminum alloy. Anodized finish hard-coat.
Ring diameter: 25.4 mm (approximately).
Length: 45 mm (approximately).
Width: 20 mm (approximately).
-Package
:1x Rail Mount
5) 2xSnap in Rail Adapters Mount:
Easily converts 11m Dovetail to 20mm Weaver/Picatinny rails
Dovetail to Picatinny/Weaver Rail Adaptor
Innovative Rail Platform to Convert Most .22/ Rails
Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base
Top rail: 20mm; Bottom rail: 10mm.
-
Package
: 2 x Adapter, 2 x Wrench.
6)
11mm Dovetail to 20mm Picatinny Rail Extension Adapter Scope Mount:
Top rail full length:125mm
Base picatinny rail width: 11mm
Top picatinny rail width:20mm
Weight:75g
Fits dovetail 11mm rail.
Dovetail rail extension.
Can be used to conver 11mm to 21mm.
Sometime can be see through.
-PACKAGE：
1 x D0026-A  Picatinny Weaver Rail, 1 x Allen Key
7) 10 Slots Scope Riser Rail Mount:
124mm Long Scope Adapter Dovetail Mount.
Fit for 11mm Rail. Easy to install.
Material: Made of Aluminum Alloy.
Top Picatinny Rail Width: 20 mm; Bottom Dovetail Rail Width: 11mm
-
Package
: 1 x 124mm Mount; 1 X Allen Key ( Please check the size before make an order .)
8) 45-Degree 1'' (25.4mm) Ring Mount:
Accepts flashlights and red dot sights with 1 inch main tube.
Fits 7/8" Weaver or Picatinny rails and bases as commonly found on device with accessory rails.
Offset design allows easier access to flashlight tail cap button switch.
Made of solid aluminum alloy to withstand shock and recoil.
Quick detach cam lock installs in seconds.
-
Package
: 1 x Mount
9) 1 inch/30mm Quick Release Dual Ring Scope Mount:
Cantilever design. Made of durable aluminum alloy.
Quick detachable function for fast installation and detachment.
Fits 20mm Picatinny Weaver bottom rails, and with 20 mm top ring rail.
Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
Built in Weaver style rails - very handy fitting flashlights and lasers, etc.
-Package:
1 x Allen key
, 1 x 30mm Mount,
2 x 25.4mm Adapter Ring
10) Ring 30mm/1"(25.4mm) Mount with Bubble Level:
Fits on 20mm dovetail Picatinny Weaver rail mounts.
With Integrated Anti-cant bubble level to assist in maintaining level shooting platform.
Compatible with both 1 inch(25.4mm) and 30mm scopes. With Length 46mm wide 20mm top rail.
Manufactured from aircraft grade aluminum alloy.
One piece body design for better scope alignment.
-Package:
1x Scope Mount
11) 1" 25.4mm to 30mm Ring Heavy Duty Mount:
The installation and removal of the mounting ring gasket corresponds to the diameter of the two types of 25.4mm and 30mm tubing.
The rail mounting nut is equipped with a lock washer.
Installation of the two rings in one piece has become a space-saving installation for easy installation and disassembly.
The height is 40 mm from the center of the range of the top surface of the track.
-Package
:
1 x Mount
12) 1"/30mm Cantilever Weaver Forward Reach Ring Mount:
1 inch / 30mm Forward reach 1 Piece Scope Mount One Piece Torch Mount Fits 20mm Weaver rails Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
Front Lens Size: Up to 56 mm This figure describes the maximum size of the objective (front) lens.
Reach Forward / Backward Design. Clamp Design: Triple Clamp (6 bolts on each cap) Finished in Tactical Matt Black.
-
Package:
1 x Scope Mount,
2 x 25.4 mm Ring
13) A Pair of 1"/30mm Scope Mount Tool with 20mm Rail:
Made of durable aluminum alloy.
Fit for 20mm Picatinny/Weaver Rails
Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
-
Package:
2 x 30mm Barrel Mount, 2 x 25.4mm Convert Ring, 1 x Wrench
14) 25.4/30mm Quick Detach Scope Mount Ring:
High Quality Synthetic Protective Tape Applied on Rings Internal Surface
Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
It can be installed to 20mm Standard Weaver Rail
Extensively Field Tested under Extreme Operations and Well Received by Field Experts and Law Enforcement Personnel
Fits all flashlights with 30/25.4mm/1" diameter
-Pa
ckage:
1 x 30mm Scope Mount,1 x 25.4 mm Convert Ring,1 x Allen key
15) 1" 25.4mm Scope Ring 20mm Rail:
Type: Low Profile. Material: High Quality Aluminum.
Quick Detachable Design for Fast Installation or Detachment.
These scope rings fits on 20mm Picatinny Weaver rail.
Inner Ring Diameter: 25.4 mm (1"). Rings are for a solid mount.
Designed to install a Scopes/Lasers/Flashlight with 1" (25.4mm) diameter onto the Picatinny/Weaver Rail.
-Pac
kage
: 1 x Quick Release Scope Mount
16) QQ09 Scope Mount Tool
:
Easy fit scope mount. No tools reqd to quickly fit.
Working Universally for Torches / Telescope Sights / Lasers
New Mount For Flashlight Torch Telescope Sight Laser Scope Outdoor.
Note:
Mount is designed for people who want to use their torch off their device or change between device in a hurry.
Features a large easily turned knob without the need for any tools. It is approximately 75mm between centers so suits those with large objective lens on their scopes .
-Pack
age
:
1 x QQ09 Mount Only